Home » Posts tagged 'hardwood floor refinishing'

Tag Archives: hardwood floor refinishing

March 2024

Refinishing Your Hardwood Floors

Hardwood floors are a beautiful, durable, classic choice for homes. But like any surface, they can get dull or damaged over time. Refinishing is one way to breathe new life into them.hardwood floor refinishing

Hardwood Floor Refinishing Bergen County NJ is a process of sanding, staining, and sealing wood flooring. It can take several days to complete.

Refinishing wood floors involves sanding the surface to remove the old finish and prep it for a new coat of finish. This is a labor-intensive project that can take from four to seven days depending on the room size and type of finish used.

When your floors are fully refinished, they will look as good as new. However, refinishing isn’t right for everyone. For example, you shouldn’t refinish your hardwood floor if it has major scratches or gouges in it. You may be better off with a screen and recoat or replacement instead of full refinishing.

The best way to know if your floor needs refinishing is to talk with your BCC. They’ll help you decide what options are best for your specific situation and the condition of your wood flooring.

If your refinishing is being done in an area of the house that isn’t normally used, make sure to close off air vents and seal off moldings and baseboards to keep dust from escaping the room. You’ll also want to close the windows and turn off the HVAC system to avoid dust blowing through your home. It’s best to have the entire job completed in one room of your home, but if you need to work outside, cover and tape down furniture to protect it from damage.

To start the sanding process, you’ll need to buy or rent a drum sander and an edger for your wood floor refinishing. You’ll also need a variety of sanding disks, from 60- to 100-grit. You’ll need to change the sanding disks regularly, as they become dull and lose their effectiveness. A good rule of thumb is to sand with the grain and try not to oversand.

Once the sanding is complete, you’ll need to vacuum and dust off every inch of your floor. Vacuuming with a HEPA filter will help to keep any remaining dust particles out of your lungs. After sanding, it’s important to remove any sawdust that has settled on the walls and moldings, too. Wipe down the moldings with a tack cloth, a wax-impregnated piece of cheesecloth that’s designed to pick up and hold any residual sawdust.


When it comes to wood flooring, staining is a great way to highlight the natural beauty of the grain and bring out its natural colors. It can also help to create a warmer, cozier feel in your home and enhance the overall look of the room. However, staining can be tricky and there are a lot of things that can go wrong. Fortunately, with the right knowledge and expert input you can ensure that your stained floors will look beautiful for years to come.

Before starting the staining process, it is important to take some time to protect yourself and your property. For this reason, it is recommended that you wear gloves and a face mask while staining. It is also important to make sure that the area in which you are working is properly ventilated. This will reduce the risk of breathing in any toxic fumes that can be produced during the staining process.

It is also important to test your stain in an inconspicuous part of the floor prior to applying it to the entire surface. This will allow you to see if the color matches your expectations and will give you an idea of how long it will take to dry.

During the staining process, it is important that you work with the grain of the wood to prevent any unevenness. Also, it is a good idea to stain in small areas at a time and to wipe off excess stain as soon as possible. This will keep the color of the stain from becoming too dark and help you achieve a smooth, even result.

Once the stain has dried, it is a good idea to use a broom to sweep away any remaining dirt and debris. It is also a good idea to apply three coats of polyurethane. This will not only provide a durable finish, but it will also help to protect your hardwood floors from future damage.

It is important to note that if you decide to add a third coat of polyurethane it will require extra drying time. It is also recommended that you wait a week before moving your furniture back into the room. This will give the final product time to completely cure and will ensure that your hardwood floors are safe to walk on.


A final step in refinishing hardwood floors is applying a protective sealant. This will protect the hardwood floor from water damage and make it easier to clean the wood flooring. This step is important to the longevity of your flooring. When you are resealing your hardwood floors, it is important to use a high-quality product that will last. You can choose from several different types of sealants, including waxes, acrylics, or polyurethane. Polyurethane is the most popular choice because it is easy to apply and durable. It also dries quickly and has low VOCs, making it environmentally friendly.

Before starting the sealing process, you should clear the room you are working in of all furniture. You should also cover all windows and doors with plastic tarps to prevent dust from entering other rooms. Then, you should remove wall hangings and curtains. Finally, you should vacuum the entire room to remove any dirt or debris.

It is a good idea to wear a mask during the refinishing process. This will help you avoid inhaling the fumes from the chemical. You should also ventilate the area by opening a window. This will prevent the wood sealant from drying too quickly, which can cause cracks in the finish.

If your floors have dings, scratches, or gouges, these can be repaired by using wood putty. Then, they should be sanded and cleaned to prepare them for the sealant. You should also use a small brush to get into corners and tight spaces, such as under radiators.

A professional hardwood flooring contractor will have a lot of experience in this process, and they will be able to give you the best results possible. They will also have the appropriate equipment for refinishing hardwood floors, and they will be able to handle any problems that arise during the process. They will also be able to recommend the best products for your specific needs.

A good hardwood floor contractor will be bonded, insured, and licensed to work in your state. They will also have a good reputation and be a member of a reputable association. They will be able to provide you with a free estimate and give you advice on the best way to restore your floors.


Cleaning your hardwood floors on a regular basis is the best way to prevent stains and maintain their shine. Start by sweeping your hardwood floors with a dust mop to remove dirt and debris from the surface of the wood. This will also help to eliminate dust that can build up over time and make your hardwood floor duller. Next, sweep with a damp mop and apply a cleaner to the floor to remove any dirt and spills that have accumulated on the surface of the wood.

If your hardwood floor is in need of a deep clean, use a mixture of equal parts vinegar and water on the affected area to dissolve any dirt build-up or sticky messes. Make sure to test the cleaning solution on a small section of your hardwood floors to ensure it won’t damage or discolor the surface. After mopping, wipe the floor with a soft cloth to remove any remaining moisture and allow it to dry completely before walking on it again.

Before refinishing, it’s important to clear your floors of furniture and rugs. You may need to move them outside for the duration of the project, or tape some masking film around doorways to contain the dust and prevent it from escaping into other areas of your home. It’s also a good idea to have your pets removed from the work area for their own safety and to reduce the strong odors of the process.

Once your refinishing project is complete, it’s important to vacuum or sweep your hardwood floors regularly. This will remove any dust that has settled on the floor since it was last sealed and keep the air in your home healthy and free of allergens.

If your hardwood floors are starting to show signs of wear and tear, you can try to revive them by recoating or refinishing them. Choosing one process over the other depends on your goals for your floors and how much wear you’re looking to see in them. Generally, recoating will give you a better-looking finish than refinishing, but it will not address any dents or scratches in the surface of your hardwood.